China Power Factor Correction Shunt Capacitor Manufacturer, Supplier, Factory

Using metallized polypropylene film as the dielectric, the Self-healing Shunt Capacitor can automatically restore its insulation performance when the local dielectric is broken down by utilizing the energy of the instantaneous discharge. This significantly improves the operational reliability and service life of the capacitor. The Self-healing Shunt Capacitor effectively compensates for the lagging reactive current caused by inductive loads, thereby enhancing the power factor of the line and reducing additional losses during the power transmission process. This type of Self-healing Shunt Capacitor is widely applied in industrial, commercial and civilian low-voltage power distribution systems, and is particularly suitable for improving the operating efficiency of equipment such as motors and transformers, ultimately achieving the goals of energy conservation and consumption reduction, stable voltage quality and avoiding electricity penalty charges.

This product is in full conformity with the following standards: GB/T 12747.1-2004 and IEC 60831-1:2014.

GY-ZMGRH Series Three-Phase Compensation Intelligent Harmonic Suppression Power Capacitor is an integrated intelligent compensation device designed by Geyue Electric for reactive power compensation in the 0.4kV power grid.
1. Application: for 0.4kV low voltage distribution system.
2. Features: Low harmonic distortion rate. Flexible compensation. Small volume. Easy installation. Low power consumption. High reliability.
3. Functions: Harmonic filtering. Power factor improvement. Voltage quality optimization. Energy saving. Loss reduction.
4. Protections: Temperature control protection. Open-Phase protection. Overvoltage protection. Undervoltage protection, and etc.

This product has obtained CCC certification (China Compulsory Certification): Citification No. A069544. And it is strictly in accordance with the JB/T 9663-2013 and GB/T 15576-2008 Standards.

GYFK-Δ400V Three-Phase Compensation MCB DZ47 Three Phase Intelligent Low Voltage Compound Switch, designed by Geyue Electric, is a low-voltage capacitor switching element used for the switching of three-phase capacitors in a delta connection. The difference between this product and the GYFK-Δ400V Three-Phase Compensation Three Phase Intelligent Low Voltage Compound Switch is that an additional DZ47 miniature circuit breaker is added. The GYFK-Δ400V Three-Phase Compensation MCB DZ47 Three Phase Intelligent Low Voltage Compound Switch combines the advantages of thyristor and AC contactor.

This product strictly adheres to the GB/T 14048.4-2010 Standards.

GYAPF Series Active Power Filter, designed by Geyue Electric, adopts the detection technology based on the instantaneous reactive power theory, automatically tracks the changes of power grid harmonics, and has high controllability and rapid response ability. The GYAPF Series Active Power Filter overcomes the shortcomings of the traditional passive filter, such as poor effect, prone to resonance, and only being able to filter out harmonics of fixed orders. It is capable of playing an outstanding filtering role and attaining satisfactory results for all kinds of rapid and transient impact loads.

This product is strictly in line with the GBT3859.2 Standard.

BSMJ Series Single Phase Self-Healing Shunt Capacitor is suitable for 50Hz or 60Hz low-voltage power system, mainly used to improve power factor, reduce reactive power loss improve voltage quality, tap the transformer capacity and so on. It is the best power-saving product which is strongly recommended by various countries.

This product strictly conforms to: GB/T 12747.1-2004 and IEC 60831-1:2014 Standards.

The Low Voltage Self-Healing Shunt Capacitor engineered by Geyue Electric is a type of power capacitor with self-healing function. When the internal dielectric undergoes partial breakdown, the capacitor can quickly restore insulation and continue to operate normally. It is mainly used for reactive power compensation in low-voltage power grids to improve the power factor and power quality of the power system.

All aspects of this product satisfy these standard requirements: GB/T 12747.1-2004 and IEC 60831-1:2014.