China Magnetic Contactor Manufacturer, Supplier, Factory

The design principle of the CKSG series Low Voltage Series Reactor from Geyue Electric is based on the series resonant characteristics of inductance and capacitance. By precisely configuring the reactance rate, it forms a high-impedance path for specific harmonic frequencies, thereby reconstructing the impedance characteristics of the system. Its main function is to suppress the amplification of grid harmonics, limit the closing surge current, improve the voltage waveform, and protect the parallel capacitors from harmonic damage. This product is a key component in reactive power compensation devices that ensure system safety and improve power quality, widely used in industrial and commercial power distribution systems where there are harmonic sources such as frequency converters and rectification equipment.

JKWF Series 12 Loops 16 Loops APFC Automatic Power Factor Controller is an advanced and highly efficient reactive power auto-compensation controller which has been elaborately developed by Geyue Electric for the precise and automatic regulation of the power capacitor in the low-voltage distribution system below 0.4KV.
1. Model: JKWF-12/ JKWF-16
2. Mounting Dimensions: 113×113mm
3. Output Loops: 12/16 loops
4. Features: High measurement accuracy. High compensation accuracy. Friendly interface. Easy operation.
5. Two Working Modes: Automatic operation. Manual operation
6. Protections: Power failure protection. Overvoltage/ Undervoltage protection.

This product is strictly compliant line with the JB/T 9663-2013 and DL/T597-1996 Standards.

The BSMJ(Y) series three phase Split Phase Compensation Power Capacitor projected by Geyue Electric, precisely addresses the reactive power differences of each phase through three independent compensation units. Its cylindrical structure, with its uniform heat dissipation characteristics, ensures stability during frequent single-phase switching. This product is specifically designed for three phase unbalanced systems and can achieve precise phase-by-phase compensation for fluctuating loads such as rolling mills and welding production lines. At the same time, its cylindrical explosion-proof feature guarantees safe operation under impact loads.

This product rigorously adheres to the following standards: GB/T 12747.1-2004 and IEC 60831-1:2014.

Three Phase Self-Healing Shunt Capacitor designed by Geyue Electric Engineering is the fundamental component for achieving efficient energy management. The function of Three Phase Self-Healing Shunt Capacitor is to centrally compensate the inductive reactive power in the system within a three-phase balanced industrial power distribution network, thereby improving the power factor, reducing line losses, enhancing voltage quality, and avoiding power adjustment fees and penalties.

This product sternly adheres to the following standards: GB/T 12747.1-2004 and IEC 60831-1:2014.

JKW5C-12(16) Reactive Power Auto Compensation Controller is a power factor controller which is produced by Geyue Electric for the purpose of automatically switching the power capacitor in the low voltage reactive power compensation system.

1. Model: JKW5C-12(16)
2. Mounting Dimensions: 113×113mm
3. Output Loops: 12/16 loops
4. Features: High measurement accuracy. High compensation accuracy. Friendly interface. Easy operation.
5. Two Control Modes: Power factor. Reactive power.
6. Two Working Modes: Automatic operation. Manual operation.
7. Protections: Power Loss Protection. Overvoltage protection. Undervoltage protection, and etc.

This product is strictly in accordance with the JB/T 9663-2013 and DL/T597-1996 Standards.

Three-Phase Capacitors for Reactive Power Compensation provide capacitive reactive power to effectively counteract the reactive power loss caused by inductive loads in the power system, thereby significantly improving the power factor of the grid and reducing energy transmission losses in lines and transformers. Through centralized reactive power compensation of the power system, the Three-Phase Capacitors for Reactive Power Compensation ultimately achieve the dual goals of optimizing electrical energy quality and controlling electricity costs.

This product rigorously adheres to the following standards: GB/T 12747.1-2004 and IEC 60831-1:2014.