China Intelligent Three-Phase Capacitor Manufacturer, Supplier, Factory

Using metallized polypropylene film as the dielectric, the Self-healing Shunt Capacitor can automatically restore its insulation performance when the local dielectric is broken down by utilizing the energy of the instantaneous discharge. This significantly improves the operational reliability and service life of the capacitor. The Self-healing Shunt Capacitor effectively compensates for the lagging reactive current caused by inductive loads, thereby enhancing the power factor of the line and reducing additional losses during the power transmission process. This type of Self-healing Shunt Capacitor is widely applied in industrial, commercial and civilian low-voltage power distribution systems, and is particularly suitable for improving the operating efficiency of equipment such as motors and transformers, ultimately achieving the goals of energy conservation and consumption reduction, stable voltage quality and avoiding electricity penalty charges.

This product is in full conformity with the following standards: GB/T 12747.1-2004 and IEC 60831-1:2014.

Single-Phase Cylindrical Capacitor adopts a design that integrates metallized polypropylene film with a cylindrical structure. Through nanoscale evaporation coating technology, it achieves microsecond-level self-healing of the breakdown point, ensuring the continuous reliability of reactive power compensation. Single-Phase Cylindrical Capacitor is specifically optimized for single-phase distributed systems and can precisely eliminate inductive reactive power losses, raising the power factor to above 0.95, significantly reducing line energy consumption and transformer burden.

This product sternly complies with the following standards: GB/T 12747.1-2004 and IEC 60831-1:2014.

CKSG Series Reactance Rate 7% Series Reactor, manufactured by Geyue Electric, is a common dry-type iron core series reactor with 7% reactance rate used for reactive power compensation and filtering in low-voltage power systems. It is used in series with capacitors and is widely applied in scenarios such as suppressing harmonics, improving power quality, and protecting capacitors.

This product strictly complies with the GB/T 1094.6-2011 and GB/T 19212.1-2016 Standards.

GY1PM Single Phase 1P Mechanical Energy Meter engineered by Geyue Electric, only 1P (18mm) wide, is a mini-size single-phase mechanical energy meter that measures the amount of electric energy consumed by a residence, a business, or an electrically powered device.

This product shows an unswerving dedication to strictly adhering to the EN IEC 62368-1:2020+A11:2020 and EN IEC 62053-21:2021+A11:2021 Standards.

BSMJ Series Single Phase Self-Healing Shunt Capacitor is suitable for 50Hz or 60Hz low-voltage power system, mainly used to improve power factor, reduce reactive power loss improve voltage quality, tap the transformer capacity and so on. It is the best power-saving product which is strongly recommended by various countries.

This product strictly conforms to: GB/T 12747.1-2004 and IEC 60831-1:2014 Standards.

The design of Low Voltage Shunt Capacitors is based on the phase characteristic that the capacitive current leads the voltage by 90 degrees. By being connected in parallel to the alternating current grid, a capacitive current with an opposite phase to the inductive load current is generated. This capacitive current is used to counteract the lagging reactive current caused by inductive loads in the power grid, thereby improving the system's power factor and reducing the reactive power losses in the lines and transformers.

This product's design and production fully comply with these standards: GB/T 12747.1-2004 and IEC 60831-1:2014.