China Intelligent Capacitor Controller Manufacturer, Supplier, Factory

The design of Low Voltage Shunt Capacitors is based on the phase characteristic that the capacitive current leads the voltage by 90 degrees. By being connected in parallel to the alternating current grid, a capacitive current with an opposite phase to the inductive load current is generated. This capacitive current is used to counteract the lagging reactive current caused by inductive loads in the power grid, thereby improving the system's power factor and reducing the reactive power losses in the lines and transformers.

This product's design and production fully comply with these standards: GB/T 12747.1-2004 and IEC 60831-1:2014.

The JKWF series Power Compensation Controller of Geyue Electric is specifically designed for power systems below 0.4KV. It is used to precisely manage reactive power, improve power factor, and optimize power quality. It adopts a control algorithm combining fundamental reactive power and power factor, featuring 6 mixed compensation schemes, 12 intelligent coding switching, and harmonic interference suppression capabilities. It supports full digital parameter setting and permanent storage. This series of products is widely used in complex grid environments with three-phase imbalance or harmonic interference, such as industrial manufacturing, commercial buildings, and new energy power stations. It is particularly suitable for scenarios with high requirements for switching stability and compensation accuracy.

Compliance certified: JB/T 9663-2013 & DL/T 597-1996

GYAPF Series Active Power Filter, designed by Geyue Electric, adopts the detection technology based on the instantaneous reactive power theory, automatically tracks the changes of power grid harmonics, and has high controllability and rapid response ability. The GYAPF Series Active Power Filter overcomes the shortcomings of the traditional passive filter, such as poor effect, prone to resonance, and only being able to filter out harmonics of fixed orders. It is capable of playing an outstanding filtering role and attaining satisfactory results for all kinds of rapid and transient impact loads.

This product is strictly in line with the GBT3859.2 Standard.

GY-ZMF Series Split-Phase Compensation Intelligent Low Voltage Power Capacitor is an integrated intelligent compensation device designed by Geyue Electric for reactive power compensation in the 0.4kV power grid.
1. Application: for 0.4kV low voltage distribution system.
2. Features: Flexible compensation. Small volume. Easy installation. Low power consumption. High reliability.
3. Functions: Power factor improvement. Voltage quality optimization. Energy saving. Loss reduction.
4. Protections: Temperature control protection. Open-Phase protection.
Overvoltage protection. Undervoltage protection, and etc. This product has obtained CCC certification (China Compulsory Certification): Citification No. A069544. And it is strictly in accordance with the JB/T 9663-2013 and GB/T 15576-2008 Standards.

The design principle of the CKSG series Low Voltage Series Reactor from Geyue Electric is based on the series resonant characteristics of inductance and capacitance. By precisely configuring the reactance rate, it forms a high-impedance path for specific harmonic frequencies, thereby reconstructing the impedance characteristics of the system. Its main function is to suppress the amplification of grid harmonics, limit the closing surge current, improve the voltage waveform, and protect the parallel capacitors from harmonic damage. This product is a key component in reactive power compensation devices that ensure system safety and improve power quality, widely used in industrial and commercial power distribution systems where there are harmonic sources such as frequency converters and rectification equipment.

JKFG-12 12 PV Loops APFC Automatic Power Factor Controller is designed by Geyue Electric for the application of low voltage reactive power compensation in PV (photovoltaic) field: monitoring of power system line data and controlling of capacitor automatic switching
1. Model: JKFG-12
2. Overall Dimensions: 120×120mm. Mounting Dimensions: 113×113mm.
3. Output Loops: 12 loops
4. Two Working Modes: Automatic switching. Manual switching.
5. Protections: Power failure protection. Overvoltage/Undervoltage protection. Low current protection. Low power factor protection. Harmonic voltage/ Harmonic current protection (can be off).

This product is in strict accordance with the JB/T 9663-2013 and DL/T597-1996 Standards.